Pack GE 150 Isotemp for Refrigerators up to 150lt

The Pack GE 150 Isotemp for refrigerators up to 150lt is intended to convert well insulated cabinets in refrigerators or freezers contains an electronic device regulated by a thermostat. Specifically, it cools the flat-type evaporator installed inside the peak with a 12 / 24V power supply. This equipment is previously charged with gas and with all connection fittings. This kit Marine Electrical Refrigerators It is composed of Compressor, Evaporator and Regulator, System also valid for freezers up to 50lt.

Specifications of Pack GE 150 Isotemp for Refrigerators up to 150lt

This Pack GE 150 Isotemp for Refrigerators up to 150lt is composed of:

  • Danfoss BD35F 12 / 24v compressor that includes all gas connection and connection fittings.
  • Isotemp flat evaporator 350x250mm
  • Isotemp temperature controller

Advantages of Pack GE 150 Isotemp for Refrigerators up to 150lt

  • Use the least amount of battery power.
  • Effective with solar and wind loading systems.
  • Excellent stability and temperature control.
  • Very quiet operation, especially at low speed.
  • DIY installation.
  • Preloaded with R-134a refrigerant.
  • Works on 12 or 24 volts DC.

Operation of Pack GE 150 Isotemp for Refrigerators up to 150lt

316 stainless steel clamping plates contain a safe solution that freezes at 15 ° F and stores cooling energy when additional electrical power is available. The hermetically sealed compressor is the same type used in millions of domestic refrigerators and does not require maintenance.

Installation is quick and easy with quick connect accessories. The clamping plate can be mounted up to 10 feet away. The water-cooled systems have a copper-nickel corrosion-resistant condenser / heat exchanger with a reliable self-priming cooling water pump. The cooling water can be extracted from a sea cock or circulated from the freshwater tanks of the vessel.

The patented Isotemp energy management system has an automatic start that can drastically reduce battery power consumption while maintaining constant and stable temperatures.

The system detects when additional energy is available (from the engine alternator, solar panels or wind loaders) and changes the compressor at high speed, quickly freezing the retainer plate. You can reduce the power consumption of the battery by up to 50% or more compared to a similar system.


Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de

Estás comentando usando tu cuenta de Cerrar sesión /  Cambiar )

Google photo

Estás comentando usando tu cuenta de Google. Cerrar sesión /  Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión /  Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión /  Cambiar )

Conectando a %s